|
CHASSIS
|
- Torsion
resistant with rigid steel structure.
|
|
|
ENGINE
|
- Suitable
water cooled diesel engine of adequate
HP.
- Fuel
Tank capacity 300 liters.
|
|
|
TRANSMISSION
|
- Hydraulic
torque converter coupled to the
engine, oil cooler started
- Power
shift gear box with adequate speeds.
transfer box coupled to the gear box
connected to the torque converter by
hydraulic pipes and propeller shaft individual
gear step are controlled by solenoid
switch from the crane cab instrument
panel.
|
|
|
BRAKES
|
- Service:
Foot operated compressed air over
hydraulic brake acting on all wheels
- Parking:
Hand oerated spring loaded fail safe
air brake.
|
|
|
STEERING
|
- Fully
hydraulic, controlled from the crane
cab via hydraulic rotary joint to the
chassis.
- Four
steering modes-2 wheel (front). 2
wheel (rear) 4 wheel and crab.
- Auto
reversal mechanism to ensure correct
steering wheel control irrespective of
the position of the superstructure in
relation to the chassis
|
|
|
ELECTRICAL
|
- 24
volts system.
- 2
main head lamps, 2 brakes and flashing
trafficator lamps at rear 2 flashing
trafficator lamps at front, 1 work
lamp.
|
|
|
OUTRIGGERS
|
- Four
nos. out & down type hydraulically
operated with fail safe dual lock
valves.
- Control
is effected via electro hydraulic
valves individually or simultaneously.
|
|
|
HYDRAULIC
SYSTEM
|
- Main
hydraulic pump / double pump connected
to the torque converter.
- Four
nos. 3 way proportional control
valves, operated hydraulic joystick
enabling simultaneous independent
crane operation and progressive speed
control.
- Hydraulic
cylinder specially designed for
sustaining all operating and shock
loads.
- Safety
valves in all hydraulic cylinder for
protection against pipe and hose
ruptures.
- Pistons
rods hard chromed and protected from
dirt by scraper rings
- Counter
balance valves (in derricking and
hoist circuit ) to provide controlled
derricking and hoisting operation
under load
|
|
|
AXLE
|
- Front
: Drive & steer, rigid frame
mounted.
- Rear
: Drive & steer
centrally pivoted, lateral oscillating
with hydraulic locking device
|
|
|
DRIVE
|
- 4
x4 for off the road movement, all
wheel drive.
- 4
x 2 for road travel, front axle
drive.
|
|
|
WHEELS
|
- Wheel
rim 13.00 x 25.00 offset disc.
- Tyre
inflator ( standard ).
|
|
|
CRANE
CAB ALL WEATHER COMFORT
|
- Sheet
metal structure sliding door, large
sized safety glass windows adjustable
driver's seat hinged windscreen pane
interior lights indicator for torque converter
and gear box oil temperature
compressed air pressure gauge for
hydraulic system
of superstructure, rpm meter hour
meter and pilot lamps for engine
monitoring self centering type control
levers. All controls for crane traveling
operations within easy reach.
|
|
|
SUPERSTRUCTURE
|
- All
welded rigid construction
Counterweight : removeable , bolted to
the superstructure
|
|
|
RING
GEAR ASSEMBLY
|
- Single
ball bearing slewing ring fitted
between carrier and superstructure.
|
|
|
SLEWING
GEAR
|
- Fixed
displacement hydraulic motor,
planetary gear drive including spring
loaded multiple disc brakes released hydraulically.
- Free
wheeling safety device for automatic
alignment of boom over the load 360
degree continuous slew.
|
|
|
BOOM
|
- Derricking
through single cylinder with integral
safety brake valve for controlled
lowering
|
|
|
HOIST
WINCH
|
- Drive:
Axial piston, fixed displacement
hydraulic motor through planetary gear
box.
- Brakes:
An automatic fall safe spring applied
hydraulic released multiple disc
brake, together with counter balance
valve to control lowering speed.
- Over
hoist / over lowering limit switch to
cut off hydraulic system in case of
over hoisting / over lowering
|
|
|
HOOK
BLOCK
|
- 4
sheaves reeved for 8 part line.
|
|
|
ELECTRONIC
SAFE LOAD INDICATOR
|
- Indicates
actual load rated load, load radius
and boom elevation angle at any
particular instant. At overoad
condition there is audio visual
warning and all such hydraulic
operation that tend to increase the
load moments (unsafe operation) are
automatically cut off while operations
like derricking in and hoisting
downstill being possible
|
|
|
OPTIONAL
- EXTRA
|
- Lattice
boom extension 8.5 m
- Auxiliary
hoisting gear with rope length 110m
(approx) and rope dia 14 mm (RT
30)
/ 16 mm (RT 40).
- High
tension warning device.
- 6
tonnes hook block.
- Cab
heater & demister
- Fire
extinguishers.
- Spark
arrestor
- Marker
lights
- Fog
lightsCold
climate kit
- Spare
wheel & tyre
- Air
conditioner.
|
|
|
OTHER
SPECIFICATIONS
|
|
RT
- 30 |
RT
- 40 |
| Max.
lift Capacity |
32
T |
40
T |
| Main
hydraulic pump |
Fixed
Displacement Gear Type |
Fixed
Displacement Gear Type |
| Max.
Flow |
220
l/min |
220
l/min |
| Circuit
Pressure |
260
kg / sq.cm. |
260
kg / sq.cm. |
| Hoist
winch Rope |
|
|
|
Dia |
16
mm |
18
mm |
|
Length |
160
m |
175
m |
| Boom |
3
section hydraulic
telescopic
rectangular box
type boom made of 4
high
tensile steel sections welded
together |
4
Section boom (3 section
hydraulically telescopic +1
power
assist ) rectangular box
type boom
made of 4 plates
high tensile steel
welded
together |
| Gross
vehicle weight |
28,300
kg |
36,000
kg |
| Counter
weight |
6.1
T |
6.3
T |
| Tyres |
18.00
x 25-28 PR 4 Nos.
earthmover type |
18.00
x 25-32 PR 4 nos.
earthmover type |
| PERFORMANCE
PARAMETER |
Boom
Derricking
(unladen) |
-1
deg to +83 deg in 45 sec
(approx.) |
-
2 deg to + 80 deg in 40 sec
(approx.) |
Boom
telescoping
(unladen) |
10
m to 25 m in 75 sec
(approx.) |
9.75
m to 24.75 m in 75 sec. (approx ) |
| Grade ability |
50%
unladen |
45%
unladen |
| Max.
Travel Speed |
30
kmph |
30
kmph |
| Slew
Speed |
0-3
rpm (unladen) |
0-2
rpm (unladen) |
Turning
Circle Dia
(kerb) |
14
m |
15.5
m |
| Max.
Rope Speed |
60
m / min |
60
m / min |
|
|
